Hydroguard 4 Stage Undersink Reverse Osmosis System

Hydro Gaurd SKU: HDGT-45

$699.00 $769.00 Save $70

Tax includedShipping calculated at checkout

Only 1 left!

Application

For an under-sink installation for designated purified drinking water 

Description

Suited for mains pressure installations

The Hydro Guard HDGT-45 - By Hrydro Gaurd Water Sciences - Ohio USA

boasts a 4-stage reverse osmosis (RO) system, delivering filtration quality equivalent to a 5-stage RO system. It simplifies maintenance with its user-friendly design, featuring four readily replaceable filters.

The Hydro Guard HDGT-45 is easy to install and requires no tools to change filters, plus it features a 4.5-gallon storage tank.

Benefits

Eliminates up to 99% of dissolved solids, chlorine, fluoride, microorganisms, and heavy metals such as barium, cadmium, chromium, lead, and mercury

Sanitary quick-change cartridges No tools required

Flow leak detector shut-off valve silently guards against any water leaks that may occur.

Water Hammer protection system protects your system from water hammer and spikes in water pressure

Designer lead-free faucet provides elegance and durability.

4.5-gallon plastic storage tank

NSF-certified materials.

High-performance filters only need to be changed once per year

Durable UV-resistant plastic prevents yellowing

Quick connect fittings make installation fast, convenient, and sanitary. No tools are required for filter change

Features

  • Flow lock drip tray
  • Shok Blok - designed to protect the RO system from water pressure spikes
  • Twist & turn for simple DIY filter changes
  • Sanitary quick-change cartridges No tools required
  • Flow Lok detector shut-off valve silently guards against any water leaks that may occur.
  • Water Hammer protection system protects your system from water hammer and spikes in water pressure
  • Faucet - designer lead-free faucet provides elegance and durability.
  • 17 litres storage tank

Includes

  • Feed water adapter
  • Tank ball valve
  • Drain saddle
  • (already connected to the system)
  • Connection tube
  • Pre-filter
  • Carbon filter
  • Membrane
  • Post carbon filter
  • 1 membrane
  • Inline flow restrictor
  • Fixed elbow

Performance

NSF58 certification completed & pending

Material safety – chemical extraction

Structural integrity – cyclic and hyrdostatic

Contaminant reduction – Total dissolved solids, VOC, cyst, etc.

NSF/ANSI 58 is the American National Standard for point-of-use (POU) reverse osmosis (RO) systems. It was developed by a joint committee with equal representation from regulators, manufacturers and end users. This standard includes requirements addressing various aspects of these systems, including:

  • Safety of materials in contact with drinking water
  • Structural integrity
  • TDS (total dissolved solids) reduction performance
  • Efficiency rating
  • Recovery rating
  • Contaminant reduction performance
  • Information for the end us
  • Specifications
  • Max inlet pressure 80psi
  • Min inlet Pressure 40psi
  • System dimensions H x W x D  318 x 12 x 349 (mm)
  • System weight 2.7kg
  • Tank Dimensions 425 h x 287w (mm)
  • Tank capacity 7-12 litres
  • Tank weight full 18kg
  • Tank pressure should be 8-10psi when empty
  • The tank will take 4 -5 hours to fill  (flush once before use)

 

Filtration

STAGE 1 – HDGT-SED5 Sediment Pre-Filter – Removes dirt, sand, rust, and other physical particles. - Replace Every 12 Months

STAGE 2 – HDGT-CB5 Carbon Block Pre-Filter – Removes the chlorine, chloramines, bad tastes, odors, and chemicals - Replace Every 12 Months

STAGE 3 -  Membrane Removes up to 99% of the total dissolved solids and contaminants. Replace every 24 months

STAGE 4 – Carbon Post Filter (HDGT-CB5P) – Removes dissolved gases, tastes, and odors from the holding tank water Replace Every 12 Months

 

Optional Remineralizer

By passing the water through a remineralizer filter after the RO membrane, minerals like calcium and magnesium can be reintroduced into the water, improving its taste and potentially providing health benefits. This process helps create a more balanced and healthier drinking water.

Reverse osmosis (RO) water tends to be slightly acidic due to its lack of minerals. In the process of reverse osmosis, most minerals, including alkaline minerals, are removed from the water, resulting in a lower pH level. Generally, RO water tends to have a pH slightly below neutral, but it's important to note that the exact pH may vary depending on specific circumstances

  • The Kit includes 1 Atlas Filtri mineral water filter cartridge
  • Connections - push fit
  • 2m 1/4" tube
  • Dual clip wall cartridge mounting bracket with screws

Warranty

3-Year Limited Warranty

 

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)