Oasis Underbench 6 Stage RO with Remineraliser

Description

Brand: Atlas Filtri

Based in: Italy

Model: ATL-OASISDP

Stages: 6

Benefits: It removes 99% of contaminants, including chlorine, heavy metals, fluoride, and chemicals. It restores essential minerals for better taste and health. It provides pure, great-tasting water straight from your tap.

Application: Complete under-sink RO system with remineralizing filter, tap, and tank. Enjoy ultra-pure water with essential minerals restored for great taste and health. Compact, easy to install, ideal for kitchens

Certification:  NSF58 Certified & Watermark

Warranty: Limited Warranty: Atlas Filtri guarantees that each product is free of factory defects in normal use and maintenance conditions for a period of 12 months from the date of purchase.

Stages

• Stage 1: 5 Micron Sediment Filter
  PP Melt Blown Polyspun Sediment Filter.
  The filter will remove sediment, rust, and fine particles. This filter is designed to protect the remainder of the system from particles.
  Life span: 6 - 12 months.
  Max temperature: 45°C (113°F).

• Stage 2: Granular Activated Carbon Purifier
  CTO, Chlorine, Taste, and Odor Reduction.
  This cartridge contains granular activated carbon to reduce chlorine (bad tastes, odors), herbicides, pesticides, and traces of heavy metals.
  Life span: 6-12 months.
  Max temperature: 45°C (113°F).

• Stage 3: 5 Micron Carbon Block Filter/Purifier
  Chlorine, Taste, Odor, and Sediment Reduction.
  This is an activated carbon block filter/purifier that will filter sediment, rust, and fine particles. It will also reduce chlorine (bad tastes, odors), herbicides, pesticides, and traces of heavy metals.
  Life span: 6-12 months.
  Max temperature: 45°C (113°F).

• Stage 4: Reverse Osmosis Filmtec (Dupont) TW30-1812- Membrane The FilmTec Residential Reverse Osmosis (RO) Elements are some of the most reliable  and consistent elements manufactured in the industry
  Membrane for the main impurity removal.The membrane has pores that are so small that only pure water makes it through to the other side, effectively removing undesirable contaminants like nitrate, fluoride, arsenic, and salt.
  Lifespan depends on the level of impurities in water and incoming pressure, but under normal circumstances, the membrane is expected to last 2-4 years. FilmTec Residential Reverse Osmosis (RO) Elements are some of the most reliable
   and consistent elements manufactured in the industry

• Stage 5: Carbon Post Filter
  The carbon post filter’s main job is to give the water a final polish and improve the taste of the water after it has passed through the membrane and has been stored in the tank.
  Life span: 6-12 months.
  Max temperature: 45°C (113°F).

• Stage 6: Re-Mineralize
  A remineralizer is generally used to add beneficial minerals back into water, particularly after a process like reverse osmosis, which can remove most minerals. This can sometimes result in a slight increase in pH, making the water less acidic. However, the main purpose is not to reduce pH but to improve the mineral content and taste of the water.
  Life span: 6 months.
  Max temperature: 45°C (113°F).

Specifications

• Brand: Atlas Filtri (Italy)
• Max Flow Rate: 0.13 lpm or 7.8 lph
• Nominal Micron Rating: 5
• Inlet/Outlet: 1/4"
• Min inlet Pressure: 45psi - 310kpa
• Max inlet Pressure: 8 bar - 116psi
• Min Temperature: 4°C
• Max Temperature: 45°C
• Shipping Package Dimensions: 660 x 440 x 310 mm (13 kg)
• Feed Water Temperature: 39°C
• Ambient Temperature: 40°C
• Water Supply Connection: ½″ thread
• Filter Dimensions (H×W×D): 350x450x150 mm
• Tank Dimensions (H×W×D): 350x260x260 mm
• Tank Bladder Pressure: 5.8-8.7 psi

For installation where the cold water pressure is 45psi and above

Performance

• Recovery Rating: 20%
• TDS Rejection: 96-98% after the membrane and 91-93% after the post filters, provided that the maximum TDS value for the inlet water is respected.
• The system has a 12L tank which holds 4L.
• Max Processing Capacity: up to 50 GPD a day.
• Saline Reduction: 90%
• Bacterial Rejection: >98%
• Filmtec (Dupont) TW30-1812 Membrane

Test Results of Water Quality After RO Membrane

(Remineralization is added after the membrane.) The membrane cannot differentiate between ‘good’ and ‘bad’ substances, so it removes both.

• pH: 5.5-6.5
  Water with a pH of 5.5-6.5 is mildly acidic, which is generally safe for drinking.
  Note: The re-mineralizing cartridge is designed to increase pH and reintroduce beneficial minerals like calcium and magnesium back into the water.
• TDS: 5-15 ppm
  A Total Dissolved Solids (TDS) measurement of 5-15 parts per million (ppm) is exceptionally low and typically considered excellent for drinking water quality. Water with such a low TDS concentration generally tastes very pure and is often preferred for drinking. It indicates that the water has very few dissolved minerals, salts, and other contaminants, resulting in a clean and refreshing taste.
• Calcium: <2 ppm
  A calcium concentration of less than 2 parts per million (ppm) in water is exceptionally low and typically considered excellent. Calcium is one of the minerals commonly found in water, contributing to water hardness. While calcium is essential for human health, excessively high levels of calcium in drinking water can lead to scale buildup in pipes, appliances, and fixtures. Having a calcium concentration of less than 2 ppm indicates very soft water, which is generally preferred for household use because it reduces the likelihood of scale buildup and may also provide a more refreshing taste. However, it's important to note that extremely low levels of calcium may not provide sufficient dietary intake of this essential mineral, so it's essential to consider overall dietary sources of calcium when evaluating water quality.
  Note: The re-mineralizing cartridge is designed to reintroduce beneficial minerals like calcium back into the water.
• Magnesium: <1 ppm
  A magnesium concentration of less than 1 part per million (ppm) in water is also exceptionally low and generally considered excellent. Similar to calcium, magnesium is a mineral commonly found in water that contributes to water hardness. While magnesium is essential for human health, excessively high levels of magnesium in drinking water can lead to water hardness and potential scale buildup issues. Having a magnesium concentration of less than 1 ppm indicates very soft water, which, as mentioned earlier, is typically preferred for household use due to reduced scale buildup and potentially better taste.
  Note: The re-mineralizing cartridge is designed to reintroduce beneficial minerals like magnesium back into the water.
• Sodium + Potassium: <5 ppm
  Having a combined concentration of sodium and potassium of less than 5 ppm indicates very low levels of these minerals in water, which is typically considered beneficial for overall health, particularly for those who need to limit their sodium intake. Water with such low concentrations of sodium and potassium is often preferred for drinking and cooking, as it contributes minimal additional sodium or potassium to the diet.

Note: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

*Values are determined under the following conditions: the temperature of supply water is 25 °C (77 °F), supply water quality, and operation conditions correspond to the manufacturer’s requirements.

Downloads

Oasis Atlis Filtri specifications