Fisher & Paykel Fridge Filter 847201

$98.00

Tax includedShipping calculated at checkout

Description 

Genuine Fisher & Paykel Fridge Filter

Please note Fisher and Paykel have two different water filters using similar model numbers. Please double check you are ordering the correct model for your needs.

This is the genuine Fisher & Paykel 847201 water filter for some F&P fridge freezers.

This filter removes:

  • 99% of chlorine taste and odour
  • 99% of chloramine taste and odour
  • 99.99% of cysts
  • 97% of mercury
  • 99% of asbestos

Specifications:

  • Flow Rate: 0.5 gpm / 1.89 Lpm
  • Capacity: 170 Gallons / 643 Litres
  • Operating Temperature: 0.6C - 38C
  • Operating Pressure: 120psi / 827kPa max.
  • Filter Life: 6 Months or when the Change Filter light comes on.
  • Certified NSF/ANSI Standards 42
  • Dimensions 180mm Long

Fridge Models

RF523 Series
25806-A RF523GDUX1 FP AA
25808-A RF523MLDUX1 FP AA
25809-A RF523MRDUX1 FP AA
24894-A RF523GDUX1 FP AA
24899-A RF523MLDUX1 FP AA
24904-A RF523MRDUX1 FP AA 

Installation

1. Find the filter cover on the back wall, top right of your refrigerator.
2. Pull the tab at the bottom of the cover towards you to release.
3. Hold the base of the filter firmly and pull it towards you.
4. Rotate the filter counterclockwise 90C. The filter should release from the filter head; if it does not, pull the filter towards you.
5. Pull out the filter to remove it from the filter head. Discard the old filter.
6. Remove the packaging from the new filter and align the new filter into the filter head.
7. Insert the filter into the filter head and push firmly all the way into the filter head and rotate clockwise 90C until it locks into place.
8. Push the entire filter back into the bracket and push the cover up and into the slots at the top of the filter housing until it locks into place.

Please note: It is not necessary to shut off the water supply when installing this water filter.

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)