Water Filter (AF) Standard 10"x2.5" Arsenic Removal Resin Filter

$167.00

Tax includedShipping calculated at checkout

 Description

Arsenic reduction is achieved by utilizing the advanced media technology of
ResinTech® ASM-10-HP resin. This Arsenic selective media has an unsurpassed
capacity and is effective over the entire pH range of potable water. ResinTech®
ASM-10-HP is a strongly basic hybrid anion exchange resin, specially formulated
to remove arsenic selectively

Applications 


RESIDENTIAL POINT OF USE (POU) DRINKING WATER SYSTEM 

The EPA has defined as acceptable or safe a limit of 10 ppb for arsenic in
drinking water. If laboratory testing indicates levels above 10 ppb, the use of
a specific arsenic removal cartridge is displayed, due to the contamination of
source water.


PRIVATE WELLS POINT OF ENTRY (POE) 

Well, water is particularly susceptible to arsenic, those not connected to municipal
drinking water systems may want to consider this option as part of a whole
house system. Wells supply 15% of the American population with drinking water,
and these wells are not subject to EPA regulations. These wells provide safe
clean water, but occasionally can become contaminated, resulting in illness.

Features & Benefits


USE OF RESINTECH® ASM-10-HP MEDIA


The initial capture of arsenate is by ion exchange, thus the removal rate of arsenic from the inlet liquid is much faster than in ordinary iron-based
media. Its strong base exchange functionally can be used to simultaneously remove nitrate, uranium, chromate and other objectionable anions while removing arsenate


FDA DRINKING WATER APPROVED MATERIALS OF CONSTRUCTION
Sonic welded construction is a solvent free method to join and assemble plastic parts, producing the highest quality safest product


OVERSIZED CARTRIDGE FOR MAXIMUM MEDIA FILL
AF Series cartridges have up to 50% higher capacity and extend cartridge life, due to the use of larger cartridges


QUALITY PRODUCED AND MADE IN THE USA
Cartridges are produced by Aries FilterWorks, a division of ResinTech®. Strict quality control over all aspects of production allows
complete traceability of every cartridge

Specifications

  • Size 10” x 2.5”
  • Temperature (c˚) Min. 4 c˚ Max 37c˚
  • Pressure (psi) Min. 20 Max. 125
  • Micron Rating (μ) 25
  • Max flow rate 4 -5 lpm
  • Capacity service life 6 months (dependant on water testing)

Construction materials

  • Gasket TPE TPE TPE TPE
  • End Caps PP ABS ABS ABS
  • Pads PE PE PE PE
  • Body / Tube PP ABS ABS ABS
  • Media  ResinTech® ASM-10-HP Hybrid Anion Resin

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)